Underground Mining Drilling Rig
Operator-friendliness: Designed with electric proportional hydraulic control, compared with full hydraulic control, it is more operator-friendly, which is more convenient, flexible and accurate in positioning and drilling.
High-efficiency: It is capable of automatic drilling, automatic retraction, automatic anti-sticking, automatic termination of impact, etc., which can effectively improve the service life of drilling tools and the drilling depth.
Intelligence: The data can be digitally recorded, such as the number of drilled holes and drilling depths, and the construction can be monitored and evaluated in real time.
Safety: It is equipped with self-diagnosis and safety voice alarm system for real-time monitoring and fault detection, which can issue voice broadcast to comply with the requirements of intelligent mine construction specifications.
Flexibility: Coming with articulated chassis and four-wheel drive, it is robust and powerful to achieve flexible, fast and safe driving in tunnels.
Cost-effectiveness: It features high durability, easy repair and maintenance, so the operating cost can be effectively reduced.
|
TECHNICAL SPECIFICATIONS |
|||
|
ROCK DriLL |
|
||
|
Mode |
1838ME |
Electrical proportional hydraulic control system |
|
|
Bitshank |
T38 |
Automatic anti-sticking |
|
|
Helght from top to rotating center |
95mm |
Automatic drilling, automatic retraction, automatic termination of impact; no impact without water and lubrication |
|
|
Length(excluding bit shank) |
1008mm |
Automatic recording of the drilling depth and number of holes drilled |
|
|
Impact power |
18KW |
Control system |
|
|
Impact frequency |
60HZ |
Electrical proportional hydraulic control system |
|
|
Rated pressure of hydraulic system |
210bar |
Electrical system |
|
|
Max. pressure of hydraulic system |
230bar |
Total installed power |
62KW |
|
Rotating system |
Independent rotation |
Main motor |
1×55kw |
|
Rotating speed |
0 ~ 215rpm |
Voltage |
380v |
|
Rotating torque (Max.) |
1000Nm |
Frequency |
50HZ |
|
Weight |
170kg |
Starting mode |
Star/Delta |
|
Noise level |
<106dB(A) |
Motor overheat protection |
Available |
|
Propulsion beam |
Type A Standard |
TypeB Optional |
Type C Optional
|
|
Total length |
5873mm |
5268mm |
4658mm |
|
Drill pipe length |
4305mm |
3700mm |
3090mm |
|
Drilling depth |
3960mm |
3410mm |
2800mm |
|
Weight (including rock drill) |
640kg |
611kg |
576kg |
|
Propulsion |
7kn-15kn |
7kn-15kn |
7kn-15kn |
|
Air system |
Hydraulic system |
||
|
Working pressure |
0.8MPa |
Hydraulic pump unit |
lset |
|
Working flow |
410L/min |
Pump unloading and start |
Available |
|
Drill arm |
Max. system pressure |
23Mpa |
|
|
Telescopic stroke |
1250mm |
Max. capacity of hydraulic oil tank |
240L |
|
Swing |
±35° |
Low oil level indicator |
1set |
|
Water supply system |
Manual refilling pump |
1set |
|
|
Working pressure |
1MPa-2MPa |
Return oil filtering blockage alarm |
1set |
|
Working flow |
40L/min-120L/min |
Water cooler of hydraulic oil |
1set |
|
Chassis |
|
Mineral based hydraulic oil |
1set |
|
66kw diesel engine |
lset |
Approach angle |
19° |
|
Articulated steering |
Rota fing angle±38 |
Departure angle |
18° |
|
Muffler |
lset |
Horn and signal lamp |
Available
|
|
Fixed driving seat with safety belt |
lset |
Capacity of fuel tank |
85L |
|
Four-wheel drive |
lset |
Electrical system |
24V
|
|
Hydraulic torque converter |
lset |
Battery |
1x120Ah
|
|
Transmission |
lset |
Service lamp |
2x100W,4x48W,switched on/offindependently
|
|
Front axle (including fully enclosed multi-disc wet hydraulic brake and parking brake) |
lset |
Working lamp |
2x100W,4x48W,switched on/offindependently
|
|
Rear axle (including fully enclosed multi-disc wet hydraulic brake) |
lset |
Level |
Available |
|
Tyre |
8.25-20 |
Fire extinguisher |
Available |
Underground Mining Drilling Rig
Bottom valve DN25
Jackstay
Speed measurement sensor
Reducer 100-80
Recommended Products
relevant information