CHP25B (A5 Series)
Product Description
1.Strong mobility, convenient transition, and covering multiple tunnel faces;
2.Electric power system has strong adaptability and high reliability.
3.The manipulator is flexible in action, wide in construction scope and free of construction blind areas.
4.The dosage of accelerator is automatically matched with the concrete square quantity to reduce the consumption of accelerator.
5.The maximum spraying volume can reach 30m3/hour, and the comprehensive rebound rate can be controlled to be no more than 15%;
6.Cost-effective, durable equipment, easy maintenance, accessories easy to purchase.
Technical parameters
|
I. Parameter of whole machine |
|
|
Model |
CHP25B |
|
Total length |
9450mm |
|
Total width |
2500mm |
|
Total height |
3380mm |
|
Rated weight |
16T |
|
II. Parameters of boom leg |
|
|
Arm structure form |
Large arm and small arm pitch |
|
Two telescopic sections of small arm |
|
|
Spraying height |
16m |
|
Spraying width |
24m |
|
Pitch angle of large arm |
0-70° |
|
Pitch angle of small arm |
+20°-110° |
|
Arm rotaing angle |
360° |
|
Axial rotation angle of nozzle |
360° |
|
Vertical axial swing angle of Nozzle |
240° |
|
Nozzle brushing angle |
360° |
|
Center width of front leg cylinder |
2186mm |
|
Center width of rear leg cylinder |
2186mm |
|
Center distance between front and rear leg cylinders |
5030mm |
|
III. Pumping system parameters |
|
|
Drive mode |
Motor |
|
Rated power of motor |
55kw |
|
Motor operating voltage |
380V |
|
Concrete displacement |
25m³/h |
|
Concrete outlet pressure |
7.3Mpa |
|
Inner diameter of conveying cylinder |
Φ160mm |
|
Conveying cylinder stroke |
1000mm |
|
Hydraulic system |
Open |
|
Conveying pipe diameter |
Φ 125 - Φ 80 mm reducing |
|
Nozzle diameter |
Φ50mm |
|
IV. Chassis parameters |
|
|
Chassis model |
FOTON chassis |
|
Wheelbase |
5250mm |
|
Front axle track |
1940mm |
|
Rear axle track |
1861mm |
|
Fuel tank volume |
200L |
|
Maximum speed |
≤90km/h |
|
Maximum gradability |
≤20% |
|
Minimum ground clearance |
260mm |
|
Minimum turning radius |
18m |
|
Admixture output flow |
0～1000L/h |
|
Maximum outlet pressure of admixture system |
18bar |
Underground Mining Drilling Rig
Bottom valve DN25
Jackstay
Speed measurement sensor
Reducer 100-80
Recommended Products
relevant information