Arch installation vehicle
Main functions:
Installation and steel mesh laying of steel arches (including steel arches and grille arches) for full-section and step construction of tunnels; high-altitude work platforms for quality inspection, wind pipe installation, defect repair, grouting, etc.
Main technical features:
Safe: Equipped with two mechanical arms and two working platforms to keep workers away from the face and provde a safer operating environment;
Labor-saving: only 4 people are required to install steel frame and lay steel mesh for one device, saving investment of 2-3 people.
Money-asving: automobile chassis is flexible so that one device can take into account more than one face, reducing equipment investment;
Efficient: Mechanized construction improves work efficiency, takes only 30-40 minutes to install an arch frame, and accelerates process cycle;
technical parameters
Item | Parameter |
---|---|
Chassis power | 118kw |
Maximum driving speed | 80km/h |
Minimum turning radius | 10m |
Maximum gradability | 15° |
Whole vehicle length | 9000mm |
Whole vehicle width | 2480mm |
Whole vehicle height | 3100mm |
Whole vehicle mass | 15400kg |
Lifting capacity | 1500kg |
Maximum horizontal width of operation | ±9m |
Boom pitch angle | -20° to +58° |
Working platform rotation angle | 120° |
Minimum ground clearance | 300mm |
Wheelbase | 5250mm |
Front axle track | 1987mm |
Rear axle track | 1860mm |
Tire model | 9.00R20 |
Tire diameter | 900mm |
Drive mode | Rear wheel drive |
Steering | Front wheel steering |
Maximum lifting height | 12m |
Maximum horizontal distance of operation | 11m |
Boom swinging angle | ±40° |
Manipulator pitch angle | ﹣20° to ﹢90 |
Product
Bottom valve DN25
Jackstay
Speed measurement sensor
Reducer 100-80
Duct 1.5M
Recommended Products
relevant information
在线留言